Silicone T-Hose, 63mm (2.50") ID w/25mm (1") ID Branch Color:Black This size is recommended for

This size is recommended for our 2 1/2" (63mm) ID silicone hose when used with our HJ63 hose joiner

5mm wall thickness (100mm / 3 15/16" and 74mm / 2 15/16" OD) and a working pressure rating over 12 psi (64 psi burst pressure)

Be sure to slide the hose far enough that you can position one of the large hose clamps above the clip slot

Slide the large end of the reducing elbow over the nipple on the coolant reservoir

Silicone T-Hose, 63mm (2.50") ID w/25mm (1") ID Branch Color:Black This size is recommended forOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These special Tees measure approximately 4 inches long on the run with a 1" ID branch measuring approximately 1. 5" long. Note: This hose is