Silicone Hose, 1 1/4" I.D. 180 degree Elbow, 4" Legs 20789 HJ13) and Lined Hose Clamps

HJ13) and Lined Hose Clamps (Part No

5mm wall thickness (37mm / 1 1/2" and 35mm / 1 3/8" OD) and a working pressure rating over 50 psi (250 psi burst pressure)

The 3-ply reinforcement results in a 4mm wall thickness (27mm / 1 1/16" and 24mm / 15/16" OD) and a working pressure rating over 60 psi (310 psi burst pressure)

Use with our Aluminum Splicing Nipples (HJ51 and HJ45) and Lined Hose Clamps (Part No

Silicone Hose, 1 1/4" I.D. 180 degree Elbow, 4" Legs 20789 HJ13) and Lined Hose ClampsOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 180 degree elbows have a 1 1 4" ID with a smooth, shiny "wipe down" finish. Legs measure approximately 4 inches long (measured from the