Fuel Hose, 3" I.D. 45 degree Elbow, 6" Legs E90.51-RED but constant exposure to pure

but constant exposure to pure petroleum will destroy the silicone rubber

Use with our Lined Hose Clamps (Part No

Note that this temperature rating is best suited to the "cold" (post-intercooler) side of the system

The 3-ply reinforcement results in a 4mm wall thickness (30mm / 1 3/16" and 24mm / 15/16" OD) and a working pressure rating over 60 psi (300 psi burst pressure)

Fuel Hose, 3" I.D. 45 degree Elbow, 6" Legs E90.51-RED but constant exposure to pureThis 3" (76mm) ID hose combines the tough flexibility and good looks of our black silicone coolant hoses with a fuel and oil resistant fluorocarbon rubber (FKM) inner liner. It is ideal for use as a fuel filler hose (connecting your fender filler to your fuel tank or fuel cell) or other low pressure fluid transfer applications. The single ply fabric reinforcement makes it relatively soft and very flexible. Pre molded 45 degree elbow, black only.