Gates PowerGrip SB73 Clamp for Hose O.D. 2-3/4 to 3 SR57.51-BLACK 00) to clamp the hose

00) to clamp the hose over a 5" OD tube

5mm wall thickness (50mm / 2" and 44mm / 1 3/4" OD) and a working pressure rating over 28 psi (140 psi burst pressure)

This size is recommended for our 2 1/4" and 2 3/8" (57mm and 60mm) ID silicone hose when used with our HJ57 and HJ60 hose joiners

The 3-ply reinforcement results in a working pressure rating in excess of 38 psi and a 4

Gates PowerGrip SB73 Clamp for Hose O.D. 2-3/4 to 3 SR57.51-BLACK 00) to clamp the hoseRevolutionary Gates PowerGrip SB hose clamps eliminate the need for screwdrivers and even the need for retightening! The special heat shrink polymer sleeves create a tight seal with uniform pressure all around your hose, even if the fitting is out of round. PowerGrip clamps resist loosening throughout repeated heat cycles, making them maintenance free. They eliminate a lot of metal and sharp edges under the hood. On top of all that, they look super