Photo Eye Metal GC550012-12v remote control The 2-channel receiver allows for

The 2-channel receiver allows for programming the P2 relay

Receiver Programming: Relay P2 programming from momentary to latching mode (to hold gate open)

1 x 7 day timer

Transmitter right button to receiver programming is complete

Photo Eye Metal GC550012-12v remote control The 2-channel receiver allows forThe photo eye is a secondary safety device. It produces a beam between the 2 units. When the beam is broken it will keep the gate from closing. It requires wires to be connected to both units (20 gauge) for operation. Typically a swing gate needs two sets of photo eyes for the best area protection. One set of photo eyes pointing across the drive on the outside of the hinge post (A). The second set mounted across the drive at the point where the gate