90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (35.0 mm OD, 114.3 mm CLR) Flat Profile Industrial Hole Saw Notcher

Industrial Hole Saw Notcher

Minimum Outside Diameter (OD): 1/2" (12

This die fits the Portabender Tube and Pipe Bender for bending 1" by 1" square tubing at a centerline radius of 3-1/2" with a maximum degree of bend of 90 degrees after springback

and 2-1/2" Dimple Dies

90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (35.0 mm OD, 114.3 mm CLR) Flat Profile Industrial Hole Saw NotcherSpecs Outside Diameter of the Tubing (OD): 35. 0 mm Minimum Wall Thickness (DOM): 0. 095 (2. 4 mm) Minimum Wall Thickness (4130): 0. 095 (2. 4 mm) Minimum Wall Thickness (ERW): 0. 109 (2. 8 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 4 1 2" (114. 3 mm) Maximum Degree of