180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (20.0 mm OD, 76.2 mm CLR) 0.058" Minimum Centerline Radius (CLR): Approx

Minimum Centerline Radius (CLR): Approx

Maximum Size: 1-1/2" (38

This die fits the Portabender Tube and Pipe Bender for bending 1" by 1" square tubing at a centerline radius of 3-1/2" with a maximum degree of bend of 90 degrees after springback

Includes: 1-1/4" Dimple Die | Requires 1-1/4" Pilot Hole

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (20.0 mm OD, 76.2 mm CLR) 0.058" Minimum Centerline Radius (CLR): ApproxSpecs Outside Diameter of the Tubing (OD): 20. 0 mm Minimum Wall Thickness (DOM): 0. 058" (1. 5 mm) Minimum Wall Thickness (4130): 0. 058" (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065" (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 3" (76. 2 mm) Maximum Degree of