Link ECU CAN Lambda (CANLAM) Map Using Link G4/G4+/G4X ECU’s select

Using Link G4/G4+/G4X ECU’s select the MAP sensor type in PC Link as ‘Link 3 Bar’

*If the pins have wires

Any EVO8 car with a 3 plug ECU will also require this ECU

To connect to the CAN use CANLTW (PN 101-0211) or CANF (PN 101-0020)

Link ECU CAN Lambda (CANLAM) Map Using Link G4/G4+/G4X ECU’s selectLinks CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. If using the CAN Lambda with a G4+ G4X PlugIn ECU use a Link CANPCB cable to access the CAN port on the PlugIn PCB and a Link CANF field insertable CAN plug. Please note proper CAN protocol must be followed. See manual below for guidance.