Round Tube Die for 302 "One-Shot" Tube and Pipe Bender (32 mm OD, 127 mm CLR) 0.120" Note: Requires 2 1/4-14 x

Note: Requires 2 1/4-14 x 1 1/8" outside threads and 1-8 x 3/4" internal threads on the hydraulic cylinder

Maximum Outside Diamter (OD): 6" (127 mm)

Center Roll Positioning: Manual

SE allows for dxf/step/iges/ interfacing (with the Import/Export module)

Round Tube Die for 302 "One-Shot" Tube and Pipe Bender (32 mm OD, 127 mm CLR) 0.120" Note: Requires 2 1/4-14 xSpecs Outside Diameter of the Tubing (OD): 32. 0 mm Minimum Wall Thickness (DOM): 0. 083 (2. 1 mm) Minimum Wall Thickness (4130): 0. 083 (2. 1 mm) Minimum Wall Thickness (ERW): 0. 095 (2. 4 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 5 (127 mm) Maximum Degree of Bend: 90,