180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (38.0 mm OD, 177.8 mm CLR) NPS 1/4 Outside Diameter of the Tubing

Outside Diameter of the Tubing (OD): 1-3/8" (34

Made in the USA and completely serviceable

Notice how when values are entered into 2 or 3 directions at one time this is defining angles other than 90 degrees and will also define rotations

SE checks to verify sufficient material is available for the bending process

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (38.0 mm OD, 177.8 mm CLR) NPS 1/4 Outside Diameter of the TubingSpecs Outside Diameter of the Tubing (OD): 38. 0 mm Minimum Wall Thickness (DOM): 0. 058" (1. 5 mm) Minimum Wall Thickness (4130): 0. 058" (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065" (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 7" (177. 8 mm) Maximum Degree of