90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (30.0 mm OD, 101.6 mm CLR) NPS 1-1/2 The assembly interface consists of

The assembly interface consists of 3 primary functions

This die fits the 105 Brute Tube and Pipe Bender for bending 1-1/8" OD round tubing at a 3" centerline radius with a maximum degree of bend of 90 degrees after springback

repeatable bends (less than 10% distortion in most cases)

Outside Diameter of the Tubing (OD): 38

90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (30.0 mm OD, 101.6 mm CLR) NPS 1-1/2 The assembly interface consists ofSpecs Outside Diameter of the Tubing (OD): 30. 0 mm Minimum Wall Thickness (DOM): 0. 065 (1. 7 mm) Minimum Wall Thickness (4130): 0. 065 (1. 7 mm) Minimum Wall Thickness (ERW): 0. 083 (2. 1 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 4" (101. 6 mm) Maximum Degree of Bend: