JT Lite JT2 7' 8" 2.0OD The top section of the

The top section of the pole measuring 3'0" is fitted with a zinc plated steel top pin and countersunk hole for a bolted connection to the bottom section

The bottom adjustable mast fitting is constructed of aluminum and zinc plated steel and features a milled steel rolling wheel that slides easily on the cross cables of this frame system

Great for cleaning and taking sharp edges off of recently cut pipe and/or damaged extrusion ends

Perfect for cleaning and dulling sharp keder edges

JT Lite JT2 7' 8" 2.0OD The top section of theThis kedered aluminum tubing is used as a rafter in the Jumbotrac Lite 15' wide frame tent system. Each length of tubing is drilled with parallel 7 16" diameter through holes located 3" from each end of the extrusion for connection to a 3 8" Diam. push button and an additional hole in the center of the extrusion. Specifications: Base Material: 2. 72" x 2. 06" JT2 Extrusion 6061 T6 Structural Aluminum Tubing, ID 1. 750", OD 2. 06", and a 0. 125" wall