iKegger 2.0 | Spare Part | Mini Regulator Gauge Accessories These custom-made soda stream adapters

These custom-made soda stream adapters allow you to use THREADED 400g Soda Stream bottles from North America & Europe with a mini regulator (it screws in where a  threaded CO2 bulb would via a 3/8" UNF thread)

You should use a remote gas line between the regulator outlet and the gas disconnect so the gas bottle isn't hanging off the side of the keg

cocktails or soda system

2L Disposable Gas Bottles (approx 140 x 2g N2 bulbs)

iKegger 2.0 | Spare Part | Mini Regulator Gauge Accessories These custom-made soda stream adaptersIf you forget to turn the regulator off when installing or removing a source of gas (including disconnecting or connecting a pressurised keg) then you can damage the gauge and the needle will be stuck on a pressure above zero. The most likely part ot need replacing on the iKegger 2. 0 system is the gauge of the regulator. This should be avoided as it can damage the internal mechanism, however in most cases can be fixed by replacing the gauge. Note: